Roland RC-505 loop station - Bstock shop model
| Article number: | RC-505 |
| Delivery time: | In stock in warehouse, delivery 3 - 5 days |
Beat Boxers ", singers and performers of various origins can from now with its own Loop Station shave high peaks: the RC-505 is a" looper "to" tell you "and soon indispensable for everyone ... The compact desktop housing sleeps five stereo phrase tracks that can be played in different ways. In addition, there are effects for the incoming and the previously recorded signals for the most insane and expressive deformations of the audio material. Connect a microphone, an electronic instrument or any other audio source and build your performances layer after layer until everyone assists with his mouth full of teeth! connect via its USB port, you can use the RC-505 to your computer and those like him operate with the feet, a MIDI foot can connect.
Nominal Input Level
MIC INPUT (variable): -40 dBu (typ.) -10 dBu (max)
INPUT INST (variable): -10 dBu (typ.), +4 dBu (max)
INPUT AUX: -20 dBu
Input Impedance
MIC INPUT: 4 k ohms
INPUT INST: 200 k ohms
INPUT AUX: 22 k ohms
Nominal Output Level
LINE OUT: -10 dBu
Output Impedance
LINE OUT: 2 k ohms
Recommended Load Impedance
LINE OUT: 10 k ohms or greater
Recording / Playback
Maximum Recording Time: Approx. 3 hours (stereo)
Maximum Memory Phrase: 99
Number of Tracks: 5
Data Format: WAV (44.1 kHz, 16-bit linear, stereo)
effect Type
INPUT FX / FX TRACK
FILTER
PHASER
FLANGER
SYNTH
LO-FI
GUITAR TO BASS
TRANSPOSE
ROBOT
VOCAL DIST
VOCODER
COMP
EQ
INSULATOR
OCTAVE
PAN
SLICER
DELAY
TAPE ECHO
Granular DELAY
CHORUS
REVERB
BEAT REPEAT * 1
BEAT SHIFT * 1
BEAT SCATTER * 1
VINYL FLICK * 1
* 1 TRACK FX only
MASTER FX
COMP
REVERB
Rhythm Type
85
display
16 characters, two lines (backlit LCD)
USB
Mass Storage Class
Audio / MIDI
connectors
MIC INPUT jack: XLR type (balanced, phantom power:
DC 48 V, 10 mA max)
INPUT INST (L / MONO, R) jacks: 1/4-inch phone type
AUX INPUT jack: Stereo miniature phone type
PHONES jack: 1/4-inch stereo phone type
LINE OUTPUT (L / MONO, R) jacks: 1/4-inch stereo phone type
CTL 1, 2 / EXP jacket: 1/4-inch TRS phone type
USB port: USB Type B
MIDI (IN, OUT) connectors
DC IN jack
Power Supply
AC adapter
Current Draw
420 mA
Dimensions
420 (W) x 210 (D) x 68 (H) mm
16-9 / 16 (W) x 8-5 / 16 (D) x 2-11 / 16 (H) inches
Weight
1.4 kg
3 lbs 2 oz
Accessories
AC adapter
Owner's manual
Options (sold separately)
Foot Switch: FS-5U, FS-6
Expression pedal: Roland EV-5, FV-500L, FV-500H
* 0 dBu = 0.775 Vrms
All specifications and appearances are subject to change.
- Loop Station which can be operated by hand - perfect for "beat boxers' club singers and performers.
- 5 for simultaneous stereo tracks of dedicated control components and a separate volume faders.
- Numerous effects on the processing of the input signals, and the tracks, with typical to DJ and sampler effects.
- For each track, you can select the appropriate display mode and determine whether it should or should not be synchronized.
- 99 memories for the storage of the five tracks, the effect and display settings eva
- 85 rhythm patterns, including composite sizes.
- Remote control via MIDI, with footswitches and / or expression pedal.
- USB port for import / export of car equipment from / to a computer; audio and MIDI data transfer to and from your favorite DAW software.
- XLR microphone input with phantom power, instrument inputs (mono / stereo), and auxiliary input (stereo).
stereo tracks with dedicated actuators
With five simultaneous tracks available, the RC-505 just as the extensive BOSS Loop Station. Separate buttons for recording / overdubbing / playback and stopping the recording / playback control make good intuitive so your loops sound even more impressive. Furthermore, you can for each track select the appropriate display mode ( "Multi", "Single", "One-Shot", "Reverse" etc.) and determine whether it should or should not be synchronized.
powerful effects
Those who want to deliver a superior at any time can make use of the numerous internal effects. For inputs you can choose effects like "Robot" and "VOCODER" lets you instantly create an awesome atmosphere. For the display, there is a separate effect section with things like "VINYL FLICK" and "BEAT REPEAT", in particular for DJs and performers with guts are interesting. you can assign the desired effects and then on and off during playback or recording at the 6 buttons (3 for INPUT FX and another 3 for the TRACK FX section). In addition, there are TRACK INPUT FX and FX-controllers for influencing the effect desired parameters (filter frequency, volume effect etc.). The output signal can finally be processed with a compressor and a reverb.
Memories and drum machine
In the 99 phrase memories can all always be stored: the data of the tracks, the display settings, the effect parameters so often required settings as "User Set" will be saved, you can reload later to the currently selected phrases on. to edit a completely different way. Who needs a rhythmic basis or instant drum machine, can rely on the 85 rhythm patterns. Apart from the usual grooves can also find composite signatures. If necessary, the rhythm is only output to the headphone connector and then serves as a luxury metronome.
Audio inputs and USB
The RC-505 offers multiple inputs, which can be used simultaneously, so you can always process audio material of different origins in your "loops". More specifically, you possess an XLR microphone input with phantom power, 1/4 "-jacks for line signals (mono / stereo) and an auxiliary input (mini jack) for a music player, smartphone or other stereo source. The USB port can be connected to your computer for the import / export WAV files, which is handy for archiving your phrases or for working with audio material that was not included with the RC-505. In addition, the RC-505 can serve as a USB-based audio / MIDI interface and so when "Audio I / O" for your DAW software. Conversely, the internally stored audio content can be synchronized via MIDI.
Extensive POWERS
The RC-505 provides multiple opportunities to influence your "loops" you can to 8 functions to the controls on the front panel to assign an optional expression pedal and / or optional foot switches. Those who prefer to work with a controller can change its parameters with MIDI control commands. The allocations of the 8 parameters are stored in the phrase memories, so you for each "song" / each project can control other parameters.